Genuine Dyson DC25 used Head Clear Cover & Bumper Assembly

This is the clear part of the cleanerhead assembly. It has been fully cleaned and checked. The item is in full working order, although signs of previous use may be visible, this does not affect its performance.Will fit all versions of the Dyson DC25 vacuums

Dyson DC25 Rear Pedal Step Genuine Vacuum Stand Stabilizer Red

If the red pedal has snapped on your DC25, you can easily replace it with this refurbished part. We have fully checked and cleaned the part ready for you to fit. (Does Not Include The Spring)Will fit all versions of the DC25 vacuum

DYSON VACUUM CLEANER TURBO BRUSH FLOOR TOOL WITH ADAPTOR

Vacuum Cleaner Turbo Turbo Brush Tool HeadGive Extra Performance to your Vacuum with this Turbine Floor Tool - a common add on For Most Dyson Vacuum Models,✅ Suitable for Wand/Hose Attachment DC07 DC14 DC32 DC33 DC39 DC25 DC19T2 Upright & Cylinder ModelsLower in Price here than on our ebay storeEbay item Number:  306938848505Just Click and Go(Suction Driven Turbines no Electric Involved makes for easy attachment)Please Note: This is a Compatible Generic Floor Head Designed as a alternative option if genuine not available etc

Dyson DC25 Vacuum Cleaner Brushroll End Cap

This end cap will fit all versions of the Dyson DC25 vacuum. While NOT a GENUINE part it has been made to the same specification.  

DYSON COMBINATION TOOL

2 IN 1 TOOL CONSISTS OF BRUSH AND CREVICE TOOLFOR VARIOUS DYSON MODELS:DC24, DC25, DC50, DC40, DC41, DC75, V6, DC59, DC58

Dyson Vacuum Cleaner Star Torx Screwdriver Set (Set of 3) T15T,T10T and T8

Help get the job done with these Torx Screwdriver Set Sizes:  T15, T10 and T8widely use-able on a wide range of vacuum cleaner brands

DYSON DC25 Vacuum Cleaner Brush Bar

Brand: Holbeach VacsBrand New CompatibleBrush roll or also known as a beater bar/Brush Bar fits all models of Dyson DC25.It can be fitted in less than 60 seconds for what these cost we recommend changing your brush bar every few years or when your brush starts getting chewed at one end or mid brush roll. 

Dyson DC25 Upright Switch Cover - 914088-01 GENUINE & ORIGINAL DC25 Animal

This part will fit all versions of the Dyson DC25 ball vacuum. Item is in fully working condition and has been cleaned ready to be fitted onto your machine (some scratches may remain, this does not affect performance)Will only fit DC25 models despite looking similar to other models

Dyson DC25 Toothed Belt

This toothed belt is located inside the cleaner head and connects the motor to the brush bar cog. Please ensure you have taken your old belt off and confirm there is a fault with it. This is a genuine Dyson part. Please check the number on your belt: 914006-01 and 14006-01-01 

Genuine Dyson DC25 Vacuum Cleaner Hoover Bearing Assembly 914064-01

Genuine Dyson DC25 Vacuum Cleaner Hoover Bearing Assembly 914064-01This bearing is the one located filter side of the ball, you have to remove the ball to reveal the bearing. This is the small bearing and not the one located other other side which is bigger.Will fit all versions of the Dyson DC25 Ball vacuum

4 PIECE DYSON TOOL KIT

TOOL KIT PIECE CONSISTS OF:1 X COMBINATION TOOL (BRUSH & CREVICE TOOL)1 X STAIR TOOL1 X COMBINATION TOOL (WIDER & NARROWER VERSION)1 X TURBO HEAD WITH ADAPTOR

DYSON 9.4M CABLE 1.0MM 2 CORE

9.4M Vacuum Cleaner Hoover Mains Power Flex Cable Lead & Plug For Various Models & BrandsCompatible With Dyson Models Below:DC01, DC03, DC04, DC07, DC14, DC33 (Please Note: this Cable is Pacifically for the DC14 Models however if you change the terminals on the ends you can make these fit above models and further below Brands.Vax, Hoover, Henry/Hetty etcLength - 9.4M2 Core1.0mmColour - GreyComes complete with plug and quality rubberised casing

DYSON DC24 POWER SWITCH

DYSON STAIR TOOL

MODELS IT FITS:DC24, DC25, DC27, DC33, DC40, DC41, DC50, DC41, DC75, V6, DC58, DC44, DC35

Dyson DC25 Serviced Cyclone

Is your Cyclone Due a service? But you don't have the time to get someone in or take it somewhere.Than this is a great alternative, Our cyclones have been fully stripped and seals checked, before being rebuilt.These come with 1x washed pre filterThe picture above shows what to expect from a serviced CycloneIt does not mean this is the colour or condition you will receive as these cyclones are sent out randomly due to various colours availableYou might receive Yellow, Bronze, Purple, Blue, White, RedIf you are wanting a certain colour message us prior to purchase and I will see if I have it available.

DYSON COMBINATION TOOL

THIS WILL FIT A RANGE OF DYSON MODELS:DC24, DC25, DC33, DC27, DC50, DC40, DC41, DC75, V6, DC58, DC16

VACUUM CLEANER POWER CORD/WIRE/LEAD CLIP FOR DYSON AND VARIOUS OTHER BRANDS

1x Dyson Mains Power cord Cable clip To Fit following models DC01 DC03 DC04 DC07 DC14 DC33 DC24 DC25 DC40 DC41 UP22/Light BallThis also fits other brands with a 4.8 to 6mm thickness Lead(The more Thickness, the more you will have to squeeze the clasp together)However it Comes in handy when you are fed up of your plug swinging about hitting your leg when moving it and these can be used on other things other then vacuum leads, i.e. power tool leads, Colour will be random, however if your after a certain colour contact us first.These will come unclasped ready for fitting, then once clasp is in place squeeze ends until clasp claws join together and hold in place, due to wire thickness some might require more squeezing then others to join together

Can't find the part you need, CLICK HERE

In need of a Part but can't find it on our website.Send us a message and a photo of what you are after and we will have a look what we have in stock.Due to Thousands of vacuum parts it takes a lot of time to list all Parts available. If you let us know what you are after we can get it listed.

GENUINE DYSON DC25 RESET SWITCH

About This ItemSuitable for ALL Dc25 modelsProduct Info:Brand: DysonModel: DC25 Weight: 0.05gStyle: For Upright Warranty: 30 days Return to base warrantyCondition: ReclaimedAdditional Info:There are plenty of guides online on installing the switch. The brush bar is engineered to shut off for protection if something jams it. If it's not rotating as normal, it may just need resetting This reset switch will fit all versions of the DC25 vacuum. Please ensure you have fully checked your machine and are confident that this is the part you require.Warranty:Warranty on this item is for 30 days, it does not cover accidental damage or misuse.