DC40 Spares

4 PIECE DYSON TOOL KIT

TOOL KIT PIECE CONSISTS OF:1 X COMBINATION TOOL (BRUSH & CREVICE TOOL)1 X STAIR TOOL1 X COMBINATION TOOL (WIDER & NARROWER VERSION)1 X TURBO HEAD WITH ADAPTOR

COMPATIBLE DYSON MAIN HOSE TO FIT DC40, 41, 75 VACUUMS

COMPATIBLE REPLACEMENT TO THE GENUINE PARTIf any additional information is required please send us a email.Due to In and out stock changing daily please allow up to 5 working days to receive your item.

DYSON 9.4M CABLE 1.0MM 2 CORE

9.4M Vacuum Cleaner Hoover Mains Power Flex Cable Lead & Plug For Various Models & BrandsCompatible With Dyson Models Below:DC01, DC03, DC04, DC07, DC14, DC33 (Please Note: this Cable is Pacifically for the DC14 Models however if you change the terminals on the ends you can make these fit above models and further below Brands.Vax, Hoover, Henry/Hetty etcLength - 9.4M2 Core1.0mmColour - GreyComes complete with plug and quality rubberised casing

DYSON COMBINATION TOOL

THIS WILL FIT A RANGE OF DYSON MODELS:DC24, DC25, DC33, DC27, DC50, DC40, DC41, DC75, V6, DC58, DC16

DYSON COMBINATION TOOL

2 IN 1 TOOL CONSISTS OF BRUSH AND CREVICE TOOLFOR VARIOUS DYSON MODELS:DC24, DC25, DC50, DC40, DC41, DC75, V6, DC59, DC58

DYSON COMPATIBLE BRUSH TO FIT DC40 NON ERP MODELS - DYS924405-01

COMPATIBLE REPLACEMENT DYSON DC40 NON ERP BRUSH BAR This fits Dc40 NON ERP model only(If your brush assembly has a red slider adjustment on the head assembly then this brush WILL NOT fit.)if your brush is Purple then you need product number DYS966751-01If any additional information is required please send us a email.Due to In and out stock changing daily please allow up to 5 working days to receive your item.

DYSON DC24 POWER SWITCH

Dyson DC40 Clear Bin Flap Lid With Seal

Dyson DC40 DC41 DC55 DC75 Wand Handle Clips for Upright Ball Vacuum Cleaner,

Genuine Dyson DC40/41/55/75 Wand Replacement ClipsWhy replace a good wand just cause a clip has broken, with our replacement clips they can be sent straight through your letterbox These are reclaimed, however each one has been inspected prior to stocking to ensure when dispatched they work as designed.if you do not have the correct tool to undo the torx screw. A small electrical screwdriver will fit and do the same job.This will fit all above vacuums This item has been previously used, And has been Given a general clean so they can be fitted straight away.All Reclaimed parts have been inspected prior to listing to ensure part is good to be reused.The above Part photos are stock photos for illustration only as we have more than one available, All photos taken above are taken in our white room. So that our photos are as clear as possible so you get to see the condition as well as what your item might look like. This might alter colour's slightly to be more brighter than what they are. all photos belong to Holbeach Vacuumon this itemPostage & Packaging of £3.99 will be sent Tracked 48hr Postage & Packaging of £6.99 will be sent Tracked 24hr

Dyson DC40 Post Motor Filter

This filter is located at the side of the machine, behind the wheel. Will fit all DC40 models

Dyson DC40 Pre Filter

This is the filter located inside the cyclone. Despite looking like filters from other models this filter will only fit the DC40 range of vacuums

Dyson DC40 Pre Motor Filter Used GENUINE Cone Washable

This is a Genuine Dyson filter that has been fully cleaned by our own vacuum engineers. It will fit all versions of the Dyson DC40 vacuums.You are getting a Genuine filter at a fraction of the cost of new. Also with it being Genuine will also be better quality than most after-market filters on the market.Please note that some slight stating may remain due to the filter being white inside. This however does not affect its performance. 

Dyson DC40, DC41, DC55 Vacuum Cleaner Hoover Tool Holder 920595-01

Genuine Dyson part that will fit all DC40, DC41 and DC55 vacuum cleaners.

Dyson DC40,DC41,DC50,DC55,DC65,DC75 Stair Tool

This stair tool is made the the same specification as the Genuine. Unlike other after-market parts, ours comes with the the two red velor strips

Dyson Reclaimed Dc40/41/55/75 Chassis/Wand Handle

DC40 DC41 DC55 DC75 DYSON USED WAND HANDLE GENUINE MULTI FLOOR ANIMAL- 923522-01Reclaimed Genuine Dyson Part in good condition and at a great price This handle will fit all versions of the Dyson DC40 DC41 DC55 DC75 models. It has been fully inspected and cleaned (some scratches may remain)Simply fit straight on to your machine. Also includes the wand handle capAbove image are for illustration purposes only to show you what the product looks like, Condition will vary on every unit we send however they will have been cleaned to there best 

DYSON STAIR TOOL

MODELS IT FITS:DC24, DC25, DC27, DC33, DC40, DC41, DC50, DC41, DC75, V6, DC58, DC44, DC35

DYSON TOOL KIT

DYSON TOOL KIT CONSISTS OF 1 X STAIR TOOL 1 X COMBINATION TOOL (BRUSH & CREVICE TOOL)

GENUINE DYSON DC40 DC40i ANIMAL BASE SOLEPLATE 923652-02

GENUINE DYSON DC40 DC40i ANIMAL BASE SOLEPLATE 923652-02This item is the soleplate that goes on the bottom of the DC40 cleaner head. This will fit all NON-ERP Dc40 vacuums. Please check you have a NON-ERP machine; if your cleaner head has a purple brushbar then this soleplate will not fit. If however you have a DC40 with a grey brush bar this item will fit.We have fully inspected this part and cleaned it, so you can use it straightaway, simply fit and you are good to go.

Genuine Dyson DC40 DC42 ERP Vacuum Cleaner Hoover Internal Hose assembly

This is the red hose located under the machine that sits behind the cleanerhead. You can pull this hose out to inspect for a blockage and can easily remove it.This is not the main hose or the small hose that has black ends.Will fit all versions of the DC40 DC42 vacuum cleanersMANUFACTURESNUMBER: 92479601 924796-01