Search our catalogue below
Genuine Dyson Reclaimed Product that has been inspected and cleaned
see our Related Products below for more DC25 vacuum cleaner parts.
We have one low delivery fee of only £3.99 for Tracked 24hr Courier. Visit our delivery page to learn more
Over the Years the Tear drop shaped valve becomes loose and wears, causing the tear shape valve to Separate from the Spigot. We supply the tear drop valve, Spigot, wheel pin and screw. All of the above are good reclaimed replacement parts. NOT new
£8.00
This toothed belt is located inside the cleaner head and connects the motor to the brush bar cog. Please ensure you have taken your old belt off and confirm there is a fault with it. This is a genuine Dyson part. Please check the number on your belt: 914006-01 and 14006-01-01
£1.99
This is the small hose located on the chassis of the machine, it is the hose that transfers the suction between the cleaner head and the main hose. This is not the main hose located at the back of the machine, nor is it the lower duct hose that is located near the side of the ball.Will fit all versions of the Dyson DC25 ball vacuum. The hose has been fully checked and cleaned, some marks may remain, but this does not affect performance
£5.99
About This ItemSuitable for ALL Dc25 modelsProduct Info:Brand: DysonModel: DC25 Weight: 0.05gStyle: For Upright Warranty: 30 days Return to base warrantyCondition: ReclaimedAdditional Info:There are plenty of guides online on installing the switch. The brush bar is engineered to shut off for protection if something jams it. If it's not rotating as normal, it may just need resetting This reset switch will fit all versions of the DC25 vacuum. Please ensure you have fully checked your machine and are confident that this is the part you require.Warranty:Warranty on this item is for 30 days, it does not cover accidental damage or misuse.
£4.00