DC59 Spares

Dyson DC56 DC58 DC59 V6 Vacuum Cleaner Crevice Tool

This tool is ideal for cleaning between the sofas or for using in the car. Fits all versions of the following models;DC16, DC19T2, DC22, DC23, DC24, DC25, DC26, DC27, DC28, DC29, DC30, DC31, DC32, DC33, DC34, DC35, DC36, DC37, DC38, DC39, DC40, DC41, DC42, DC43, DC44, DC45, DC46, DC47, DC48, DC49, DC50 (Small Ball), DC51, DC52, DC53, DC54, DC55, DC56, DC58, DC59, DC63, DC65, DC66, DC75, DC76, DC77, DC78, Big Ball, V6 and Cinetic models.

£4.99

Dyson DC58 DC59 V6 BATTERY

If your cordless vacuum is not lasting like it use to, the chances are the battery has become faulty. Normally a good indication is if the machine is lasting only a few seconds. If your machine is lasting around 5 minutes, please make sure you have 'MAX' mode turned off.This is our own brand of battery, we only stock this sort as we find we have a better success rate compared to a Genuine one.Battery is easily removed by undoing 2 phillip screws. One at the back of the battery and one at the front.MAH: 3000V: 21.6vWH: 64.8

£59.99

Dyson DC58 DC59 V6 BATTERY

If your cordless vacuum is not lasting like it use to, the chances are the battery has become faulty. Normally a good indication is if the machine is ...
£59.99

Dyson DC58 DC59 V6 V7 V8 Vacuum Cleaner Charger

*PLEASE MAKE SURE THAT IT IS YOUR CHARGER THAT IS AT FAULT AND NOT SOMETHING ELSE. IF YOU ARE UNSURE THEN PLEASE MESSAGE US BEFORE ORDERING*This is a high quality after market part that will fit all versions of the DC58, DC59, V6, V7, V8 models. Unlike other chargers ours fit in the docking station like the original 

£19.99

Dyson DC58/DC59/V6/V7/V8 Pre Motor Filter

This is a high quality after-market part and offers a great cost saving alternative to genuine. The filter is located at the top of the cyclone. We also stock and sell the post filters (if your machine uses one) Filters are fully washable. At this price you can buy a couple and keep one as a spare while the other is drying

£6.49

Dyson V6 V7 V8 V10 V11 V-Ball Wheels - Cleaner head wheels

Over time the wheels on your cleaner head may start to wear, which means it will be harder to push your machine. Thankfully you can easily replace them, and at a lower cost than buying a new head.This is a complete kit, so you will receive the following:2 x V-Ball Wheels2 x Washers2 x Black ScrewsWill fit all versions of the V6 V7 V8 V10 V11 vacuums that have a v-ball cleaner head

£9.99