V7 Stick Spares

New
Quick viewAdd to wishlist

Dyson V6/V7/V8/10/V11 plush strips (fluffy head / soft roller)

If the strips that seal your cleaner head has worn, you can now easily replace them. Ensure you remove the old strips and all the adhesive (tweezers work best)These new strips come with strong adhesive already applied. Simply pull the backing off as you apply. Do not pull the backing off all in one go as you may get it stuck to itself.Note that some of the material will need to go inside the head like on the original part.You will receive enough to complete the repair to one fluffy head. This will only fit models stated in the title and only for the head that uses a soft roller. Please see the photo for the head it fits and the parts you will receive (no complete head unit is supplied - only the strips) 

£4.99
Quick viewAdd to wishlist

Dyson V7/V8 Post HEPA Filter

Dyson charge £22 + £3 postage for their filter. We however can offer you this great after-market alternative for only £8.99 delivered!Will fit all V8 models of vacuums. It will also fit all V7 vacuums that use a HEPA filter. We also sell this as a kit with the pre filter, please see below

£8.99
Quick viewAdd to wishlist

Genuine Dyson V-ball Wheel set

Have you noticed your head starting to become harder to push across the floor?Or have you noticed the worn mark on the bottom of your head Assembly?Over time the wheels on your cleaner head will start to wear, which means it will be harder to push your machine. Thankfully you can easily replace them, and at a lower cost than buying a new head.This is a complete kit, so you will receive the following:2 x V-Ball Wheels2 x Washers2 x Black ScrewsWill fit all versions of the V6 V7 V8 V10 V11 vacuums that have a v-ball cleaner headIf you are not sure on the model you have, send us a email along with some pictures of your vacuum and we will let you know what model you have. And the common areas you need to check for wear marks to ensure you get the most out of your vacuum cleaner. This is what we are known for Free Advice to help make your machine last longer.

£7.99
Quick viewAdd to wishlist

GENUINE DYSON V-BALL WHEEL SET x2

Have you noticed your head starting to become harder to push across the floor?Or have you noticed the worn mark on the bottom of your head Assembly?Over time the wheels on your cleaner head will start to wear, which means it will be harder to push your machine. Thankfully you can easily replace them, and at a lower cost than buying a new head.This is a complete kit for 2 sets, so you will receive the following:4 x V-Ball Wheels4 x Washers4 x Black ScrewsWill fit all versions of the V6 V7 V8 V10 V11 vacuums that have a v-ball cleaner headIf you are after only one set please view our other listing.If you are not sure on the model you have, send us a email along with some pictures of your vacuum and we will let you know what model you have. And the common areas you need to check for wear marks to ensure you get the most out of your vacuum cleaner. This is what we are known for Free Advice to help make your machine last longer.

£14.38