DYSON STAIR TOOL

MODELS IT FITS:DC24, DC25, DC27, DC33, DC40, DC41, DC50, DC41, DC75, V6, DC58, DC44, DC35

Dyson DC40, DC41, DC55 Vacuum Cleaner Hoover Tool Holder 920595-01

Genuine Dyson part that will fit all DC40, DC41 and DC55 vacuum cleaners.

GENUINE DYSON DC40ERP, DC41ERP, DC55ERP, DC75ERP CLEANER HEAD ASSEMBLY ERP ONLY

GENUINE NEW PART FOR DC40/41/55/75 ERP MODELS NOTHING ELSE.If any additional information is required please send us a email.Due to In and out stock changing daily please allow up to 5 working days to receive your item.GENUINE DYSON ERP ONLY HEAD TO FIT ABOVE MODELS, IF YOUR HEAD ASSEMBLY HAS A RED SLIDER ON IT LIKE THE PHOTOS AND YOUR ABOVE MODEL IS LISTED, THEN THIS HEAD WILL FIT. IF YOUR ABOVE HEAD ASSEMBLY IS LISTED BUT YOU DO NOT HAVE A RED SLIDER ON YOUR HEAD ASSEMBLY THEN THIS WILL NOT FIT. SIMPLES

Genuine Dyson DC40 DC42 ERP Vacuum Cleaner Hoover Internal Hose assembly

This is the red hose located under the machine that sits behind the cleanerhead. You can pull this hose out to inspect for a blockage and can easily remove it.This is not the main hose or the small hose that has black ends.Will fit all versions of the DC40 DC42 vacuum cleanersMANUFACTURESNUMBER: 92479601 924796-01

DYSON 9.4M CABLE 1.0MM 2 CORE

9.4M Vacuum Cleaner Hoover Mains Power Flex Cable Lead & Plug For Various Models & BrandsCompatible With Dyson Models Below:DC01, DC03, DC04, DC07, DC14, DC33 (Please Note: this Cable is Pacifically for the DC14 Models however if you change the terminals on the ends you can make these fit above models and further below Brands.Vax, Hoover, Henry/Hetty etcLength - 9.4M2 Core1.0mmColour - GreyComes complete with plug and quality rubberised casing

DC41 Post Motor Ball Filter Used GENUINE Dyson Vacuum Cleaner

This is the post filter that is located at the side of the motor. The filter has been fully cleaned and check. Please not that due to the material being white, the filter may have staining. however this will not affect its performance.

DYSON COMPATIBLE BRUSH TO FIT DC40 NON ERP MODELS - DYS924405-01

COMPATIBLE REPLACEMENT DYSON DC40 NON ERP BRUSH BAR This fits Dc40 NON ERP model only(If your brush assembly has a red slider adjustment on the head assembly then this brush WILL NOT fit.)if your brush is Purple then you need product number DYS966751-01If any additional information is required please send us a email.Due to In and out stock changing daily please allow up to 5 working days to receive your item.

GENUINE Dyson DC40 Post Motor Ball Filter Used But Cleaned

GENUINE Dyson DC40 Post Motor Ball Filter Used But CleanedThis post filter is the one located down the side of the machine behind the wheel/ball. It will fit all versions of the Dyson DC40. While it may be used it has been fully cleaned and checked by our engineers. Great alternative to buying new genuine

Dyson DC40,DC41,DC50,DC55,DC65,DC75 Stair Tool

This stair tool is made the the same specification as the Genuine. Unlike other after-market parts, ours comes with the the two red velor strips

Dyson DC40 Pre Motor Filter Used GENUINE Cone Washable

This is a Genuine Dyson filter that has been fully cleaned by our own vacuum engineers. It will fit all versions of the Dyson DC40 vacuums.You are getting a Genuine filter at a fraction of the cost of new. Also with it being Genuine will also be better quality than most after-market filters on the market.Please note that some slight stating may remain due to the filter being white inside. This however does not affect its performance. 

Main Hose for Dyson DC40 DC41 DC65 DC75

This is the main hose for the back of your machine to fit the following models DC40, DC41, DC65 & DC75 range of vacuum cleaners.Dyson charge £37.50 for their hose, we however are able to offer you this premium after market version for only £19.99

Dyson DC40 Clear Bin Flap Lid With Seal

Dyson Reclaimed Dc40/41/55/75 Chassis/Wand Handle

DC40 DC41 DC55 DC75 DYSON USED WAND HANDLE GENUINE MULTI FLOOR ANIMAL- 923522-01Reclaimed Genuine Dyson Part in good condition and at a great price This handle will fit all versions of the Dyson DC40 DC41 DC55 DC75 models. It has been fully inspected and cleaned (some scratches may remain)Simply fit straight on to your machine. Also includes the wand handle capAbove image are for illustration purposes only to show you what the product looks like, Condition will vary on every unit we send however they will have been cleaned to there best 

Dyson DC40 Post Motor Filter

This filter is located at the side of the machine, behind the wheel. Will fit all DC40 models

DYSON DC41 DC55 ERP DC75 CHANGE OVER VALVE HOSE 966428-01 GENUINE PART

This is the hose that changes the suction from the cleaner head to the main hose. This is not the hose with the red ends. Please check the picture to make sure this is the hose you require.Will fit all models of DC41 vacuums

GENUINE DYSON DC40 SWIVEL LOCK ARM 922559-01

Genuine item to fit the DC40 models. This will not fit ERP models. If you look at the sticker with the serial number on, you will see your model number. If it has ERP on the end of the model number this part will not fit,If any additional information is required please send us a email.Due to In and out stock changing daily please allow up to 5 working days to receive your item.

DYSON COMBINATION TOOL

THIS WILL FIT A RANGE OF DYSON MODELS:DC24, DC25, DC33, DC27, DC50, DC40, DC41, DC75, V6, DC58, DC16

DYSON COMBINATION TOOL

2 IN 1 TOOL CONSISTS OF BRUSH AND CREVICE TOOLFOR VARIOUS DYSON MODELS:DC24, DC25, DC50, DC40, DC41, DC75, V6, DC59, DC58

DYSON TOOL KIT

DYSON TOOL KIT CONSISTS OF 1 X STAIR TOOL 1 X COMBINATION TOOL (BRUSH & CREVICE TOOL)