DC04 Spares

WE AIM TO DISPATCH ALL ORDERS WITHIN 24 HOURS, SOME ITEMS WHERE STATED WILL BE 

SHIPPED SAME DAY IF ORDERED BEFORE 4PM

New
Quick viewAdd to wishlist

COMPATIBLE 9.4M CABLE 1.0MM 2 CORE

9.4M Vacuum Cleaner Hoover Mains Power Flex Cable Lead & Plug For Various Models & BrandsCompatible With Dyson Models Below:DC01, DC03, DC04, DC07, DC14, DC33 (Please Note: this Cable is Pacifically for the DC14 Models however if you change the terminals on the ends you can make these fit above models and further below Brands.Vax, Hoover, Henry/Hetty etcLength - 9.4M2 Core1.0mmColour - GreyComes complete with plug and quality rubberised casing

£11.99
New
Quick viewAdd to wishlist

DYSON CLUTCH BELT SET

These belts are only for the clutched versions stated below. Dyson DC03, DC04, DC07, DC14, DC33, DC27Set includes:1 x Small belt1 x Large BeltCompatible Belts are made to the same specification as the original beltsCompatible Belts are made from american rubber making them very strong and stretch-able for easier fitting.*PLEASE NOTE: THESE BELTS WILL FIT AS STATED, THEY WILL ALSO BE SMALLER THAN THE BETLS ON YOUR OLD CLUTCH, DUE TO THE OLD BELTS BEING STRETCHED OVER THE YEARS. IF YOU YOU FIND THESE BELTS TO TIGHT TO FIT, THAT IS BECAUSE EITHER YOU HAVE ORDERED THE WRONG ONES, OR STRUGGLING TO FIT THEM (NON FAULT OF THE PARTS). PLEASE ONLY BUY IF YOU ARE CONFIDENT IN FITTING THEM*

£5.99
New

DYSON CLUTCH BELT SET

These belts are only for the clutched versions stated below. Dyson DC03, DC04, DC07, DC14, DC33, DC27Set includes:1 x Small belt1 x Large BeltCompatib...
£5.99
View details
New
Quick viewAdd to wishlist

DYSON DC04 DUCT SEALS SET

This seal kit will fit all models of DC04. The complete kit is for DC04 only. So please do not order based on they look like your seals, please be sure you have a DC04 vacuum. These Seals require replacing as time goes on as they can dry out and crack, which leads them not to seal properly. We check all seals before we send them out.We are also a UK business based in Holbeach. All items sold are in the UK and will be sent direct from us.

£3.99
New
Quick viewAdd to wishlist

DYSON DC04 HEPA FILTER KIT

The kit contains:1 x Pre Motor Filter (Yellow Casing & Blue Sponge)1 x HEPA Filter (Post Filter)Now your post filter may be a white/grey filter, this kit will still fit as the HEPA filter in this kit offers a better filtration than the white filter. However if you prefer to still have the white filter we sell that as a kit with the Pre filter as well. We also sell the filters individually, however it works out cheaper to buy the kits. 

£8.99
New
Quick viewAdd to wishlist

DYSON DC04/05/07/08/14/19 POST FILTER PAD

This is the white filter pad located above the motor (under the clear bin). Yours may not look white, may be a grey/black colour from the years of motor carbon dust. These filters are not designed to be washed, which is why they are best to be replaced. If your filter is a thick plastic filter then you will need the HEPA filter that can be found on our website, however these can replace HEPA filters if not availableMulti Buy Discount Available in drop down box SAVE 20%

£3.99
New
Quick viewAdd to wishlist

DYSON DC14 CREVICE TOOL 32MM

This is a curved crevice tool that stores on the side of the DC14 vacuum.Will fit all versions of the Dyson DC14 vacuums. This will also fit DC01/DC02/DC03/DC04/DC05/DC07 Models (on the hose & wand), However it will not store on the other vacuum cleanersThis tool can also fit other branded vacuums that take a 32mm tool

£0.99
New
Quick viewAdd to wishlist

DYSON INTERNAL HOSE

This is the small hose located behind the brush housing. They can split over time causing a loss of suction. Will fit all versions of DC07,DC14 & DC33 models. Will also only fit clutchless versions of the DC04. If your hose pushes on both ends then this is not the hose for you. This hose pushes on one end and screws on the other

£5.99
New

DYSON INTERNAL HOSE

This is the small hose located behind the brush housing. They can split over time causing a loss of suction. Will fit all versions of DC07,DC14 & ...
£5.99
View details
New
Quick viewAdd to wishlist

DYSON MAINTENANCE TOOL KIT

These are not produced by Dyson, But we supply these so you have the ability to make repairs yourself if you have no one local vacuum shop to go to.Kit Contains:3 x Torx Screwdrivers - T15, T10, T81 x Belt Lifter for Dyson Clutched Vacuums Only1 x Switch Removal Tool

£12.99
New
Quick viewAdd to wishlist

DYSON ON/OFF POWER SWITCH

Genuine OEM Dyson On/Off switch for the following models DC03, DC04, DC05, DC07, DC08, DC14, DC15, DC19, DC33Due to stock colour of switch might vary, however it will still do the same job and work the sameThis is a 2 prong switch that will work with most of the Dyson vacuums (not DC01, DC02 or cordless machines)The photo shows a BAR Switch however as these are sent at random due to stock you might receive a black or Brown switch insteadOEM - Original Equipment Manufacturer. These are made by Dysons original Manufacturer  

£0.99