Search our catalogue below
These are reclaimed, however each one has been inspected prior to stocking to ensure when dispatched they work as designed.
The above Part photos are stock photos for illustration only as we have more than one available, All photos taken above are taken in our white room. So that our photos are as clear as possible so you get to see the condition as well as what your item might look like. This might alter colour's slightly to be more brighter than what they are. all photos belong to Holbeach Vacuum
on this item
Postage & Packaging of £3.99 will be sent Tracked 48hr
Postage & Packaging of £6.99 will be sent Tracked 24hr
We have one low delivery fee of only £3.99 for Tracked 24hr Courier. Visit our delivery page to learn more
This is the hose that changes the suction from the cleaner head to the main hose. This is not the hose with the red ends. Please check the picture to make sure this is the hose you require.Will fit all models of DC41 vacuums
£8.33
Genuine Dyson part that will fit all DC40, DC41 and DC55 vacuum cleaners.
£5.83
Genuine item to fit the DC40 models. This will not fit ERP models. If you look at the sticker with the serial number on, you will see your model number. If it has ERP on the end of the model number this part will not fit,If any additional information is required please send us a email.Due to In and out stock changing daily please allow up to 5 working days to receive your item.
£7.99
This is the filter located inside the cyclone. Despite looking like filters from other models this filter will only fit the DC40 range of vacuums
£8.33
This stair tool is made the the same specification as the Genuine. Unlike other after-market parts, ours comes with the the two red velor strips
£4.99
GENUINE DYSON DC40 DC40i ANIMAL BASE SOLEPLATE 923652-02This item is the soleplate that goes on the bottom of the DC40 cleaner head. This will fit all NON-ERP Dc40 vacuums. Please check you have a NON-ERP machine; if your cleaner head has a purple brushbar then this soleplate will not fit. If however you have a DC40 with a grey brush bar this item will fit.We have fully inspected this part and cleaned it, so you can use it straightaway, simply fit and you are good to go.
£7.49
GENUINE DYSON RECLAIMED PARTIf any additional information is required please send us a email.IN STOCK
£6.99
This is a Genuine Dyson filter that has been fully cleaned by our own vacuum engineers. It will fit all versions of the Dyson DC40 vacuums.You are getting a Genuine filter at a fraction of the cost of new. Also with it being Genuine will also be better quality than most after-market filters on the market.Please note that some slight stating may remain due to the filter being white inside. This however does not affect its performance.
£5.83
COMPATIBLE REPLACEMENT DYSON DC40 NON ERP BRUSH BAR This fits Dc40 NON ERP model only(If your brush assembly has a red slider adjustment on the head assembly then this brush WILL NOT fit.)if your brush is Purple then you need product number DYS966751-01If any additional information is required please send us a email.Due to In and out stock changing daily please allow up to 5 working days to receive your item.
£27.99
COMPATIBLE REPLACEMENT TO THE GENUINE PARTIf any additional information is required please send us a email.Due to In and out stock changing daily please allow up to 5 working days to receive your item.
£19.99
This is a crevice tool only. You can get a combination tool where the brush slides up and down, this is not that tool. This is a standalone crevice tool, ideal for using in the car, or for narrow spaces in your home.Fits the following models: DC40,DC41,DC50,DC55,DC65,DC75
£4.99
GENUINE NEW PART FOR DC40/41/55/75 ERP MODELS NOTHING ELSE.If any additional information is required please send us a email.Due to In and out stock changing daily please allow up to 5 working days to receive your item.GENUINE DYSON ERP ONLY HEAD TO FIT ABOVE MODELS, IF YOUR HEAD ASSEMBLY HAS A RED SLIDER ON IT LIKE THE PHOTOS AND YOUR ABOVE MODEL IS LISTED, THEN THIS HEAD WILL FIT. IF YOUR ABOVE HEAD ASSEMBLY IS LISTED BUT YOU DO NOT HAVE A RED SLIDER ON YOUR HEAD ASSEMBLY THEN THIS WILL NOT FIT. SIMPLES
£84.99
GENUINE DYSON DC40 ERP BRUSH BAR This fits Dc40 ERP model only(If your brush assembly does not have a red slider adjustment on the head assembly then this brush WILL NOT fit.)if your brush is grey then you need product number 924405-01 which can be found on our shop page under DC40.If any additional information is required please send us a email.Due to In and out stock changing daily please allow up to 5 working days to receive your item.
£40.00
GENUINE Dyson DC40 Post Motor Ball Filter Used But CleanedThis post filter is the one located down the side of the machine behind the wheel/ball. It will fit all versions of the Dyson DC40. While it may be used it has been fully cleaned and checked by our engineers. Great alternative to buying new genuine
£6.58
1x Genuine Dyson Reclaimed Mains Power cord Cable clip To Fit following models DC01 DC03 DC04 DC07 DC14 DC33 DC24 DC25 DC40 DC41 UP22/Light BallThis also fits other brands with a 4.8 to 6mm thickness Lead(The more Thickness, the more you will have to squeeze the clasp together)However it Comes in handy when you are fed up of your plug swinging about hitting your leg when moving it and these can be used on other things other then vacuum leads, i.e. power tool leads, Colour will be random, however if your after a certain colour contact us first.These will come unclasped ready for fitting, then once clasp is in place squeeze ends until clasp claws join together and hold in place, due to wire thickness some might require more squeezing then others to join togetherThis is a Previously used Item, So this item has NOT been cleanedHowever All our Vacuum Parts we have Listed have been fully Inspected. The above Part photos are stock photos for illustration only as we have more than one availableThis item will be sent Royal Mail Tracked 48hr
£1.91
BB DYSON SPECIALIST LTDA DYSON CENTRE OF EXCELLENCEITEMRecycled DC40 lower cable winder. Easy to fit. Item will be washed and ready to use.
£4.16
This cyclone has been fully stripped and cleaned. All the rubber cyclone tips are removed and cleaned before being refitted. Comes complete with the clear bin so you can fit it straightaway to your machine.While this has been fully cleaned by our own team of engineers, some signs of previous use may remain; this does not affect its performance in anyway
£29.16
This is the post filter that is located at the side of the motor. The filter has been fully cleaned and check. Please not that due to the material being white, the filter may have staining. however this will not affect its performance.
£6.66